Virus adsorbent systems based on Amazon holocellulose and nanomaterials.

The environment preservation has been an important motivation to find alternative, functional, and biodegradable materials to replace polluting petrochemicals. The production of nonbiodegradable face masks increased the concentration of microplastics in the environment, highlighting the need for sustainable alternatives, such as the use of local by-products to create efficient and eco-friendly filtering materials. Furthermore, the use of smart materials can reduce the risk of contagion and virus transmission, especially in the face of possible mutations. The development of novel materials is necessary to ensure less risk of contagion and virus transmission, as well as to preserve the environment. Taking these factors into account, 16 systems were developed with different combinations of precursor materials (holocellulose, polyaniline [ES-PANI], graphene oxide [GO], silver nanoparticles [AgNPs], and activated carbon [AC]). Adsorption tests of the spike protein showed that the systems containing GO and AC were the most efficient in the adsorption process. Similarly, plate tests conducted using the VSV-IN strain cultured in HepG2 cells showed that the system containing all phases showed the greatest reduction in viral titer method. In agreement, the biocompatibility tests showed that the compounds extracted from the systems showed low cytotoxicity or no significant cytotoxic effect in human fibroblasts. As a result, the adsorption tests of the spike protein, viral titration, and biocompatibility tests showed that systems labeled as I and J were the most efficient. In this context, the present research has significantly contributed to the technological development of antiviral systems, with improved properties and increased adsorption efficiency, reducing the viral titer and contributing efficiently to public health. In this way, these alternative materials could be employed in sensors and devices for filtering and sanitization, thus assisting in mitigating the transmission of viruses and bacteria. RESEARCH HIGHLIGHTS: Sixteen virus adsorbent systems were developed with different combinations of precursor materials (holocellulose, polyaniline (ES-PANI), graphene oxide (GO), silver nanoparticles (AgNPs), and activated carbon (AC)). The system that included all of the nanocomposites holocellulose, PANI, GO, AgNPs, and AC showed the greatest reduction in viral titration. The biocompatibility tests revealed that all systems caused only mild or moderate cytotoxicity toward human fibroblasts.

Development of cassava starch-based films incorporated with phenolic compounds produced by an Amazonian fungus.

Drug-release systems have attracted attention over the last few years since they can be used as a substitute for traditional methods of drug delivery. These have the advantage of being directly administered at the treatment site and can maintain the drug at adequate levels for a longer period, thus increasing their efficacy. Starch-based films are interesting candidates for use as matrices for drug release, especially due to starch's non-toxic properties and its biocompatibility. Endophytic fungi are an important source of bioactive molecules, including secondary metabolites such as phenolic compounds with antioxidant activity. In the present study, cassava starch-based films were developed to act as release systems of phenolic compounds with antioxidant activity. The Amazonian endophytic fungus Aspergillus niger MgF2 was cultivated in liquid media, and the fungal extract was obtained by liquid-liquid partition with ethyl acetate. The starch-based films incorporated with the fungal extract were characterized in regards to their physicochemical properties. The release kinetics of the extract from the film and its antioxidant and cytotoxic properties were also evaluated. The films incorporated with the extract presented maximum release after 25 min at 37 °C and pH 6.8. In addition, it was observed that the antioxidant compounds of the fungal extract maintain their activity after being released from the film, and were non-toxic. Therefore, considering the promising physicochemical properties of the extract-incorporated films, and their considerable antioxidant capacity, the films demonstrate great biotechnological potential with diverse applications in the pharmacological and cosmetic industries.

Synbiotic Sapota-do-Solimões (Quararibea cordata Vischer) Juice Improves Gut Microbiota and Short-Chain Fatty Acid Production in an In Vitro Model.

Sapota-do-Solimões (Quararibea cordata Vischer) is Amazon South América fruit found in Brazil, Colombia, Ecuador, and Peru. The orange-yellow fruit is usually eaten out of hand or as juice. Despite being a source of carotenoids and dietary fibers (pectin) that can reach the colon and act as an energy source for intestinal microbiota, the fruit is rarely known outside of South America. The symbiotic juice was prepared by fermenting the fruit juice with Lacticaseibacillus casei B-442 and adding prebiotic fructooligosaccharides (FOS, 7% w/v). This study evaluated the functional juice immediately after L. casei fermentation (SSJ0) and after 30 days of cold storage (SSJ30) regarding its effect on human colonic microbiota composition after in vitro fermentation. Fecal samples were collected from two healthy female volunteers, and the 16s rRNA gene sequencing analyzed the fecal microbiota composition. In vitro, colonic fermentation was performed using a batch bioreactor to simulate gastrointestinal conditions. The L. casei viability did not change significantly after 30 days of the synbiotic juice cold storage (4 °C). After the colonic fermentation, the relative abundance of Firmicutes decreased while Proteobacteria and Actinobacteria increased. Regarding short-chain fatty acid (SCFA) production by fecal colonic microbiota, the butyric acid was higher after sample SSJ0 fecal fermentation. In contrast, propionic, isobutyric, and acetic acids were higher after SSJ30 sample fecal fermentation. This study contributes to understanding the interactions between specific foods and the gut microbiota, which can affect human health and well-being.

Pouteria spp. fruits: Health benefits of bioactive compounds and their potential for the food industry.

The Sapotaceae family encompasses the genus Pouteria spp., comprising approximately 1,250 species of fruits cherished by consumers for their delightful assortment and flavors. Over the years, extensive research has been devoted to exploring the natural bioactive compounds present in these fruits, with the primary goal of preventing and/or mitigating the risk of degenerative diseases. Despite their widespread popularity in numerous countries, the chemistry, nutritional content, and biological potential of these fruits remain relatively unexplored. This comprehensive review aims to shed light on the principal volatile and non-volatile chemical components found in Pouteria fruits, which present notable antioxidant properties. By doing so, a broad perspective on the current trends in characterizing these compounds and their potential applications were provided, as well as the associated health benefits. Additionally, the prospects and potential applications of Pouteria fruits in the food industry were explored herein.

Hibiscus acetosella: An Unconventional Alternative Edible Flower Rich in Bioactive Compounds.

The interest in the consumption of edible flowers has increased since they represent a rich source of bioactive compounds, which are significantly beneficial to human health. The objective of this research was to access the bioactive compounds and antioxidant and cytotoxic properties of unconventional alternative edible flowers of Hibiscus acetosella Welw. Ex Hiern. The edible flowers presented pH value of 2.8 ± 0.00, soluble solids content of 3.4 ± 0.0 °Brix, high moisture content of about 91.8 ± 0.3%, carbohydrates (6.9 ± 1.2%), lipids (0.90 ± 0.17%), ashes (0.4 ± 0.0%), and not detectable protein. The evaluation of the scavenging activity of free radicals, such as 2,2-diphenyl-1-picryl-hydrazyl (DPPH) and 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), of the flower extract was better than the results observed for other edible flowers (507.8 ± 2.7 µM TE and 783.9 ± 30.8 µM TE, respectively) as well as the total phenolic composition (TPC) value (568.8 ± 0.8 mg GAE/g). These flowers are rich in organic acids and phenolic compounds, mainly myricetin, and quercetin derivatives, kaempferol, and anthocyanins. The extract showed no cytotoxicity for the cell lineages used, suggesting that the extract has no directly harmful effects to cells. The important bioactive compound identified in this study makes this flower especially relevant in the healthy food area due to its nutraceutical potential without showing cytotoxicity.

Cold plasma as a pre-treatment for processing improvement in food: A review.

Thermal processes can be very damaging to the nutritional and sensory quality of foods. Non-thermal technologies have been applied to reduce the impact of heat on food, reducing processing time and increasing its efficiency. Among many non-thermal technologies, cold plasma is an emerging technology with several potential applications in food processing. This technique can be used to preserve and sanitize food products, and act as a pre-treatment for drying, extraction, cooking, curing, and hydrogenation of foods. Furthermore, the reacting plasma species formed during the plasma application can change positively the sensory and nutritional aspects of foods. The aim of this review is to analyze the main findings on the application of cold plasma as a pre-treatment technology to improve food processing. In its current maturity stage, the cold plasma technology is suitable for reducing drying time, increasing extraction efficiency, as well as curing meats. This technology can convert unsaturated into saturated fats, without forming trans isomers, which can be an alternative to healthier foods. Although many advantages come from cold plasma applications, this technology still has several challenges, such as the scaling up, especially in increasing productivity and treating foods with large formats. Optimization and control of the effects of plasma on nutritional and sensory quality are still under investigation. Further improvement of the technology will come with a higher knowledge of the effects of plasma on the different chemical groups present in foods, and with the development of bigger or more powerful plasma systems.

Passion fruit (Passiflora spp.) pulp: A review on bioactive properties, health benefits and technological potential.

The Passiflora genus (Passifloraceae family) extends worldwide, but it is mainly found in the Americas. The present review aimed to select the main reports published over the last 5 years involving the chemical composition, health benefits, and products obtained from the pulps of Passifora spp. The pulps of at least 10 species of Passiflora have been studied presenting different classes of organic compounds, especially phenolic acids, and polyphenols. The main bioactivity properties include antioxidant and in vitro α-amylase and α-glucosidase enzyme inhibition. These reports highlight the potential of Passiflora for the development of a variety of products, especially fermented and non-fermented beverages, as well as foods to attend a demand for non-dairy products. In general, these products are prominent source of probiotic bacteria resistant to in vitro gastrointestinal simulation, representing an alternative for intestinal microbiota regulation. Therefore, sensory analysis is encouraging herein, as well as in vivo tests to enable the development of high value pharmaceuticals and food products. The patents confirm the great interest in research and products development in different food technology areas, as well as in biotechnology, pharmacy, and materials engineering.

Microstructured lipid microparticles containing anthocyanins: Production, characterization, storage, and resistance to the gastrointestinal tract.

Anthocyanins from grape peel extract have several biological properties and can act as a natural colorant and antioxidant agent. However, these compounds are susceptible to degradation by light, oxygen, temperature, and the gastrointestinal tract. Thus, this study produced microstructured lipid microparticles (MLMs) containing anthocyanins by the spray chilling technique and evaluated the particle stability. trans-free fully hydrogenated palm oil (FHPO) and palm oil (PO) were used as encapsulating materials in the ratios 90:10, 80:20, 70:30, 60:40, and 50:50, respectively. The concentration of grape peel extract was 40 % (w/w) in relation to the encapsulating materials. The microparticles were evaluated for thermal behavior by DSC, polymorphism, FTIR, size distribution and particle diameter, bulk density, tapped density, flow properties, morphology, phenolic compounds content, antioxidant capacity, and retention of anthocyanins. Furthermore, the storage stability of the microparticles was investigated at different temperatures (-18, 4, and 25 °C), and the anthocyanins retention capacity, kinetic parameters (half-life time and degradation constant rate), total color difference, and visual aspects were evaluated during 90 days of storage. The resistance of MLMs to the gastrointestinal tract was also evaluated. In general, higher FHPO concentrations increased the thermal resistance of the MLMs and both showed defined peaks of ß' and ß forms. The FTIR analysis showed that the MLMs preserved the original forms of their constituent materials even after atomization, with interactions between them. The increase in the PO concentration directly affected the increased mean particle diameter, agglomeration, and cohesiveness, as well as lower bulk density, tapped density, and flowability. The retention of anthocyanins in MLMs ranged from 81.5 to 61.3 % and was influenced by the particle size, with a better result observed for the treatment MLM_90:10. The same behavior was observed for the phenolic compounds content (1443.1-1247.2 mg GAE/100 g) and antioxidant capacity (1739.8-1660.6 mg TEAC/100 g). During the storage, MLMs made with FHPO to PO ratios of 80:20, 70:30, and 60:40 showed the highest stability for anthocyanin retention and color changes at the three temperatures (- 18 °C, 4 °C, and 25 °C). The gastrointestinal simulation in vitro revealed that all treatments were resistant to gastric phase and maintained a maximum and controlled release in the intestinal phase, demonstrating that FHPO together with PO are effective to protect anthocyanins during gastric digestion, and can improve the bioavailability of this compound in the human organism. Thus, the spray chilling technique may be a promising alternative for the production of anthocyanins-loaded microstructured lipid microparticles with functional properties for various technological applications.

Probiotic fermented whey-milk beverages: Effect of different probiotic strains on the physicochemical characteristics, biological activity, and bioactive peptides.

The effect of probiotic strains (Lactobacillus acidophilus La-03 (La-03); Lactobacillus acidophilus La-05 (La-05); Bifidobacterium Bb-12 (Bb-12) or Lacticaseibacillus casei-01 (L. casei-01)) on the characteristics of fermented whey-milk beverages during storage (4 °C, 30 days) was evaluated. The products were assessed for biological and antioxidant activities, physicochemical characteristics, and bioactive peptides. Probiotic addition increased α-amylase and α-glucosidase inhibition and antioxidant activities, mainly at 15 days of storage. L. casei-01 showed higher metabolic activity (higher titratable acidity and lower pH values) and the presence of anti-hypertensive peptides, while La-5 and Bb-12 showed higher α-glucosidase inhibition, improvements in the high saturated hypercholesterolemic index, and peptides with ACE-inhibitory, antimicrobial, immunomodulatory, and antioxidant activities. Our findings suggest that probiotic fermented whey-milk beverages may exert antidiabetic and antioxidant properties, being suggested La-5 or Bb-12 as probiotics and 15 days of storage.

Andean purple maize to produce extruded breakfast cereals: impact on techno-functional properties and sensory acceptance.

BACKGROUND: Andean purple maize (APM) is an ancient crop widely used as a natural coloring in traditional Peruvian cuisine. However, it has been little explored within the food industry. The present study assessed how APM impacts on techno-functional properties and sensory acceptance of breakfast cereals. Extruded samples formulated with 100, 75, 50, and 25% APM, and complemented with yellow corn grits (YCG), were analyzed for their techno-functional and sensory properties. RESULTS: Increases in bulk density, as well as reduction in the expantion and porosity were observated for extrudates containing ≥ 50% APM, accompanied by an increase in purple color intensity. Increase in milk absorption index, reduction in milk solubility index and decrease in cereal hardness with increase in APM were also observed. Despite this, APM extented the cereal bowl-life. High sensory scores of overall liking (6) and color (7) were obtained for extruded formulations containing ≥ 50% APM and low values for extrudates with 25% APM. Aroma, flavor, and texture scores did not present significant differences. CONCLUSION: APM is an ingredient with the potential to be used to produce breakfast cereals since it improves their techno-functional characteristics and sensory acceptance, at the same time, it leads to the production of healthy, nutritious, and sustainable food. © 2022 Society of Chemical Industry.

Transmural remission improves clinical outcomes up to 5 years in Crohn's disease.

INTRODUCTION: Evidence supporting transmural remission (TR) as a long-term treatment target in Crohn's disease (CD) is still unavailable. Less stringent but more reachable targets such as isolated endoscopic (IER) or radiologic remission (IRR) may also be acceptable options in the long-term. METHODS: Multicenter retrospective study including 404 CD patients evaluated by magnetic resonance enterography and colonoscopy. Five-year rates of hospitalization, surgery, use of steroids, and treatment escalation were compared between patients with TR, IER, IRR, and no remission (NR). RESULTS: 20.8% of CD patients presented TR, 23.3% IER, 13.6% IRR and 42.3% NR. TR was associated with lower risk of hospitalization (odds-ratio [OR] 0.244 [0.111-0.538], p < 0.001), surgery (OR 0.132 [0.030-0.585], p = 0.008), steroid use (OR 0.283 [0.159-0.505], p < 0.001), and treatment escalation (OR 0.088 [0.044-0.176], p < 0.001) compared to no NR. IRR resulted in lower risk of hospitalization (OR 0.333 [0.143-0.777], p = 0.011) and treatment escalation (OR 0.260 [0.125-0.540], p < 0.001), while IER reduced the risk of steroid use (OR 0.442 [0.262-0.745], p = 0.002) and treatment escalation (OR 0.490 [0.259-0.925], p = 0.028) compared to NR. CONCLUSIONS: TR improved clinical outcomes over 5 years of follow-up in CD patients. Distinct but significant benefits were seen with IER and IRR. This suggests that both endoscopic and radiologic remission should be part of the treatment targets of CD.

Microencapsulation by spray chilling in the food industry: Opportunities, challenges, and innovations.

Background: The increasing demand for healthy eating habits and the emergence of the COVID-19 pandemic, which resulted in a health crisis and global economic slowdown, has led to the consumption of functional and practical foods. Bioactive ingredients can be an alternative for healthy food choices; however, most functional compounds are sensitive to the adverse conditions of processing and digestive tract, impairing its use in food matrices, and industrial-scale applications. Microencapsulation by spray chilling can be a viable alternative to reduce these barriers in food processing. Scope and approach: This review discusses the use of spray chilling technique for microencapsulation of bioactive food ingredients. Although this technology is known in the pharmaceutical industry, it has been little exploited in the food sector. General aspects of spray chilling, the process parameters, advantages, and disadvantages are addressed. The feasibility and stability of encapsulated bioactive ingredients in food matrices and the bioavailability in vitro of solid lipid microparticles produced by spray chilling are also discussed. Main findings and conclusions: Research on the microencapsulation of bioactive ingredients by spray chilling for use in foods has shown the effectiveness of this technique to encapsulate bioactive compounds for application in food matrices. Solid microparticles produced by spray chilling can improve the stability and bioavailability of bioactive ingredients. However, further studies are required, including the use of lipid-based encapsulating agents, process parameters, and novel formulations for application in food, beverages, and packaging, as well as in vivo studies to prove the effectiveness of the formulations.

Biodefensive Based on Piper nigrum Essential Oil for Controlling of Anopheles aquasalis Larvae: Influence of Temperature (35 °C) and Preservatives.

Considerable efforts have been spent on the development of biodefensives based on the encapsulation of essential oils for controlling of urban pests from their larval stage, especially as anopheline controlling agents. The larval source management of Anopheles aquasalis is important for malaria prevention. For this reason, this research proposes larvicidal biodefensives based on polymeric particles loaded with Piper nigrum essential oil, considering the influence of temperature (35 °C) and preservatives on the formulation stability. The biodefensive containing the preservative phenoxyethanol/methylisothiazolinone (PNE) resulted in 5 months of shelf-life storage with an Encapsulation Efficiency (EE%) of essential oil of 70%. The biodefensive PNE (containing 500 µg.mL-1 of encapsulated essential oil) presented a polydisperse particle size distribution, ranging from D10 = (127 ± 10) nm to D90 = (472 ± 78) nm and a particle mean size of (236 ± 34) nm. The AFM images revealed a spherical morphology with an external surface almost regular and smooth. The controlled release of the essential oil was evaluated up to 72 h according to the Korsmeyer-Peppas mathematical model, confirming the anomalous transport (n = 0.64 in pH = 3 and pH = 10, and n = 0.65 in pH = 7). The total larvae mortality on the in loco bioassays was almost reached (92%) after 24 h. However, according to the in vitro bioassays applying the in natura essential oil alone, the concentration of 454 µg.mL-1 resulted on the mortality of 70% of the larvae after 24 h. For this reason, the highest efficiency of the biodefensive PNE may be related to the encapsulation of essential oil, delivering the loaded particles more efficiently inside the larvae. From this perspective, the present study shows that a formulation based on P. nigrum essential oil may be taken into account in the integrated management of disease vector mosquitoes.

Head-to-Tail and Head-to-Head Molecular Chains of Poly(p-Anisidine): Combined Experimental and Theoretical Evaluation.

Poly(p-anisidine) (PPA) is a polyaniline derivative presenting a methoxy (-OCH3) group at the para position of the phenyl ring. Considering the important role of conjugated polymers in novel technological applications, a systematic, combined experimental and theoretical investigation was performed to obtain more insight into the crystallization process of PPA. Conventional oxidative polymerization of p-anisidine monomer was based on a central composite rotational design (CCRD). The effects of the concentration of the monomer, ammonium persulfate (APS), and HCl on the percentage of crystallinity were considered. Several experimental techniques such as X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), multifractal analysis, Nuclear Magnetic Resonance (13C NMR), Fourier-transform Infrared spectroscopy (FTIR), and complex impedance spectroscopy analysis, in addition to Density Functional Theory (DFT), were employed to perform a systematic investigation of PPA. The experimental treatments resulted in different crystal structures with a percentage of crystallinity ranging from (29.2 ± 0.6)% (PPA1HT) to (55.1 ± 0.2)% (PPA16HT-HH). A broad halo in the PPA16HT-HH pattern from 2θ = 10.0-30.0° suggested a reduced crystallinity. Needle and globular-particle morphologies were observed in both samples; the needle morphology might have been related to the crystalline contribution. A multifractal analysis showed that the PPA surface became more complex when the crystallinity was reduced. The proposed molecular structures of PPA were supported by the high-resolution 13C NMR results, allowing us to access the percentage of head-to-tail (HT) and head-to-head (HH) molecular structures. When comparing the calculated and experimental FTIR spectra, the most pronounced changes were observed in ν(C-H), ν(N-H), ν(C-O), and ν(C-N-C) due to the influence of counterions on the polymer backbone as well as the different mechanisms of polymerization. Finally, a significant difference in the electrical conductivity was observed in the range of 1.00 × 10-9 S.cm-1 and 3.90 × 10-14 S.cm-1, respectively, for PPA1HT and PPA16HT-HH.

Encapsulation of Bromelain in Combined Sodium Alginate and Amino Acid Carriers: Experimental Design of Simplex-Centroid Mixtures for Digestibility Evaluation.

Bromelain has potential as an analgesic, an anti-inflammatory, and in cancer treatments. Despite its therapeutic effects, this protein undergoes denaturation when administered orally. Microencapsulation processes have shown potential in protein protection and as controlled release systems. Thus, this paper aimed to develop encapsulating systems using sodium alginate as a carrier material and positively charged amino acids as stabilizing agents for the controlled release of bromelain in in vitro tests. The systems were produced from the experimental design of centroid simplex mixtures. Characterizations were performed by FTIR showing that bromelain was encapsulated in all systems. XRD analyses showed that the systems are semi-crystalline solids and through SEM analysis the morphology of the formed systems followed a pattern of rough microparticles. The application of statistical analysis showed that the systems presented behavior that can be evaluated by quadratic and special cubic models, with a p-value < 0.05. The interaction between amino acids and bromelain/alginate was evaluated, and free bromelain showed a reduction of 74.0% in protein content and 23.6% in enzymatic activity at the end of gastric digestion. Furthermore, a reduction of 91.6% of protein content and 65.9% of enzymatic activity was observed at the end of intestinal digestion. The Lis system showed better interaction due to the increased stability of bromelain in terms of the amount of proteins (above 63% until the end of the intestinal phase) and the enzymatic activity of 89.3%. Thus, this study proposes the development of pH-controlled release systems aiming at increasing the stability and bioavailability of bromelain in intestinal systems.

Ohmic heating treatment in high-protein vanilla flavored milk: Quality, processing factors, and biological activity.

The processing of high-protein vanilla-flavored milk was performed under different electric field strengths of ohmic heating (5.22 V/cm, OH6; 6.96 V/cm, OH8; 8.70 V/cm, OH10; 10.43 V/cm, OH12) to evaluate the energy consumption, processing parameters, and microbiological, rheological, and biological aspects, compared with the sample submitted to conventional pasteurization (PAST, 72 °C/15 s). All samples showed higher than 12 g/100 mL of protein, consisting of high-protein content products. In addition, Ohmic Heating (OH) generated lower energy expenditure and more significant microbial inactivation of lactic acid bacteria, molds and yeasts, total mesophiles, and psychotropics. Furthermore, OH at lower electric field strengths, mainly OH8, improved anti-diabetic, anti-oxidant, and anti-hypertensive activities and rheological properties, and resulted in lower hydroxymethylfurfural contents, and higher whey protein nitrogen index. The results suggest that OH is a technology that can be used in flavored milk with high-protein content, being recommended an electric field strength of 6.96 V/cm. However, more studies are necessary to evaluate the effect of OH on high-protein dairy products, mainly by studying other OH processing parameters.

Nuclear Magnetic Resonance Approach in Brazil Nut Oil and the Occurrence of Aflatoxins.

Carcinogenic metabolites of fungi such as aflatoxins play a toxic role in some tree nuts and need to be monitored in their by-products, such as oil. In this context, Brazil nut (Bertholletia excelsa) oil, which is a commodity of great economic importance to Brazil, requires attention to monitor the presence of these toxic agents. Therefore, this study aimed to evaluate the presence of aflatoxins in Brazil nut oil and relate it to the presence of fatty acids in the oil as a surveillance tool for food safety. Brazil nut oil samples (n= 25) were acquired in northern Brazil as (a) non-branded products (n= 07) produced by local farmers using artisanal methods from nuts to be discarded by the industry and (b) industrialized products (n= 18). The samples were analyzed for total aflatoxin content by high-performance liquid chromatography and fatty acid content by nuclear magnetic resonance imaging. Seven (28%) samples were positive for the aflatoxin fractions (B1 + B2 + G1 + G2), ranging from undetected (<2.32) to 50.87 µg/kg. Of the aflatoxin positive samples evaluated by NMR analysis, it was not possible to state that the presence of a particular fatty acid can interfere or influence aflatoxin contamination. This was the first study with data on aflatoxin occurrence in Brazil nut oil. Nevertheless, further research is required to relate saturated or unsaturated fatty acid content with aflatoxin levels. We also suggest the implementation of systems to prevent contamination of the raw materials (seed) and detoxification of the oil to guarantee the product's safety and quality.

Pulsatile Controlled Release and Stability Evaluation of Polymeric Particles Containing Piper nigrum Essential Oil and Preservatives.

Considerable efforts have been spent on environmentally friendly particles for the encapsulation of essential oils. Polymeric particles were developed to encapsulate the essential oil from Piper nigrum based on gelatin and poly-ε-caprolactone (PCL) carriers. Gas Chromatography ((Flame Ionization Detection (GC/FID) and Mass Spectrometry (GC/MS)), Atomic Force Microscopy (AFM), Nanoparticle Tracking Analysis (NTA), Confocal Laser Scanning Microscopy (CLSM), Attenuated Total Reflectance-Fourier-transform Infrared Spectroscopy (ATR-FTIR), and Ultraviolet-Visible (UV-VIS) spectroscopy were used for the full colloidal system characterization. The essential oil was mainly composed of ß-caryophyllene (~35%). The stability of the encapsulated systems was evaluated by Encapsulation Efficiency (EE%), electrical conductivity, turbidity, pH, and organoleptic properties (color and odor) after adding different preservatives. The mixture of phenoxyethanol/isotialzoni-3-one (PNE system) resulted in enhanced stability of approximately 120 and 210 days under constant handling and shelf-life tests, respectively. The developed polymeric system presented a similar controlled release in acidic, neutral, or basic pH, and the release curves suggested a pulsatile release mechanism due to a complexation of essential oil in the PCL matrix. Our results showed that the developed system has potential as an alternative stable product and as a controlling agent, due to the pronounced bioactivity of the encapsulated essential oil.

PANI-WO3·2H2O Nanocomposite: Phase Interaction and Evaluation of Electronic Properties by Combined Experimental Techniques and Ab-Initio Calculation.

The development of conjugated polymer-based nanocomposites by adding metallic particles into the polymerization medium allows the proposition of novel materials presenting improved electrical and optical properties. Polyaniline Emeraldine-salt form (ES-PANI) has been extensively studied due to its controllable electrical conductivity and oxidation states. On the other hand, tungsten oxide (WO3) and its di-hydrated phases, such as WO3·2H2O, have been reported as important materials in photocatalysis and sensors. Herein, the WO3·2H2O phase was directly obtained during the in-situ polymerization of aniline hydrochloride from metallic tungsten (W), allowing the formation of hybrid nanocomposites based on its full oxidation into WO3·2H2O. The developed ES-PANI-WO3·2H2O nanocomposites were successfully characterized using experimental techniques combined with Density Functional Theory (DFT). The formation of WO3·2H2O was clearly verified after two hours of synthesis (PW2 nanocomposite), allowing the confirmation of purely physical interaction between matrix and reinforcement. As a result, increased electrical conductivity was verified in the PW2 nanocomposite: the DFT calculations revealed a charge transfer from the p-orbitals of the polymeric phase to the d-orbitals of the oxide phase, resulting in higher conductivity when compared to the pure ES-PANI.

Buriti (Mauritia flexuosa L. f.): An Amazonian fruit with potential health benefits.

The Amazon region has a significant biodiversity composed of several fruits with health benefits and distinguished potential for technological application and development of novel products. Buriti (Mauritia flexuosa) is one of the main Amazonian fruits with expressive nutraceutical properties. For this reason, this review aims to elucidate the current state of knowledge on buriti, providing information on its bioactive compounds, nutraceutical, and health potential for both technological and economic development especially in food and pharmaceutical areas. Different parts of buriti are important sources of carotenoids, fatty acids, phenolic compounds, and fibers. Antioxidant, antimicrobial, prebiotic, anti-diabetes, and anti-cancer properties have also been reported. In addition, the buriti oil presents a synergistic effect with antibiotics and it has been also an alternative to artificial dyes. However, there is a lack of information about the in vivo evaluation of the buriti's bioactive compounds providing a clearer elucidation on its biological potential, toxicity information and mechanisms of action. Proper sensory methods and the relationship between sensory quality and consumer perception are also needed to extend the possibility of developing new products. Finally, the use of non-thermal techniques is encouraged to improve the bioavailability of nutraceutical compounds and potentiate their action on human health.